hp printer errors problem
2010
With all the high-tech equipment that is entering the market today, it's normal for people to encounter technical problems and other problems. This including computers and accessories. A computer printer is a device which can sometimes have technical problems.
For a Brother printer, the message "Error Toner is usually caused by improper installation of the drum and / or the toner cartridge or the printer does not recognize the toner. To prevent the printer shows "error" or "recognize" when installing a toner cartridge, follow the steps listed below, which recovered FixYa.com a technical support and troubleshooting website for consumers with computer-related problems:
1. Confirm that you are using Genuine Brother Cartridges. Brother strongly recommends that you use only genuine toner cartridges Brother Brand replacement. Compatible toner cartridges can damage the printer.
2. Make sure you are using the correct drum and toner cartridge from the printer. Some cartridges may be similar to Brother cartridges. Authenticate the number before using the cartridge.
3. Make sure that the cartridge is not damaged. Remove the toner cartridge to perform the following steps:
a) Press the button to open the cover and open the front cover.
b) Remove the drum unit device and toner cartridge. Place on paper toner to avoid splashing.
c) Hold the locking lever down to the right and pull the toner cartridge drum unit.
d) Check the print toner for any broken or missing component. If you find damage, you have to replace the cartridge
4. If the toner cartridge is not damaged, reinstall the drum unit. If it is damaged, get a new toner cartridge and reinstall the drum unit.
5. Reset the drum / toner unit in the machine and then close the front cover.
6. If the message "Toner Error" still appears on the screen, disconnect the printer and open the front cover and remove the battery and the toner unit.
7. Check the interior, where the drum was located. On the left wall, verification a small lever, black plastic / actuator.
8. Check the actuator / lever to see if it is jammed. The actuator / lever is spring loaded and must be moved forward and forward spring to function properly.
If the lever does not move, restore, or missing, and your machine is under warranty, you can find a Brother Authorized Service Center (ASC) in your area or contact Brother Customer Service by calling 1-877-Brother (1-877-276-8437)
If the lever moves freely and springs back, still to step 9.
9. Reinstall the drum unit and toner, close the front cover and back Plug the printer in.
* Source: target = "_blank"> www.fixya.com
Unfortunately, things happen from time to time that are result in the computer related problems such as an error of a Brother printer toner. However, you do not panic. There is no support available. If you are uncomfortable with the attempt to solve the problem yourself, it would be best to contact technical support at Brother
About the Author:
Looking for great deals on a printer cartridge? Then make sure you visit Tons of Toner; one of the leading online supplies of ink and toners including
Brother printer ink
, Lexmark ink,
HP printer ink
and much more at huge savings compared to retail prices.
Article Source: ArticlesBase.com - How to Fix a Toner Error on a Brother Printer
Your printer drives you crazy???
Comment