printers info

printer error Codes: The codes for different brands of printer

The printer error codes appear every time you encounter some problems during the printing process. hp printers have changed codes in comparison with other brands such as Lexmark, Sharp, Panasonic and Brother.

Learning about the error codes from the printer will let you know how to troubleshoot printers. Do not panic if you see these codes appear in the printer or computer screen. While you know what these codes are definitely be able to go on the procedures accordingly. The printer error codes then classified by type of printer you own. These are several of the key messages we find when it comes to printer error.

Error codes for HP

The most common error messages HP printer are as follows. The codes are basically composed of the word error and a number of success. More information about how to go about these errors.

1. Error 02. This printer error indicates that the printer is "warming". If you see the HP code, you must activate the printer and disconnect the cable. Turn it on, to see if their concerns are ready for the printer. If not, then you should have replaced the formatter board.

2. Error 11. This indicates that the printer has no paper. In some cases, this code appears even if they were put href = "http://www.printcountry.com/products.asp?action=listbysku&sku; =- Z-http: / / www.printcountry.com/products.asp?action=listbysku&sku; =- Z-"> printer paper into the tray. Verify that the tray is placed correctly. In some cases it is also necessary to check the paper sensor arm. Be sure not to break.

3. Error 12. This printer error indicates that the printer is open. You need to check if the printer ink or toner cartridge is installed correctly. Similarly, it must verify if the lid is closed or not.

4. Error 13. This is the error code of the printer that means there is a paper jam. It is necessary check the jam at the entrance, exit or recording parts of the printer. This can also indicate the need to replace the pickup roller.

Code printer error for the Lexmark

Is a trademark of Lexmark printers in the market. As with the HP, you can find some error codes during printing with these brands. The number 22 indicates the paper out and paper jam or the number 30 of the printer cover open. In addition, you may also have problems with errors following:

1. 24 or manual feed invalid. This means that you should not feed the paper into the manual feed area, if the printer does not they do not ask.

2. 31 or changing paper. You have to check if the paper size that you installed is the same as that sought by the software or not. Correct this printer failed to install the correct paper size.

Panasonic and Sharp printer error code

Apart from the HP and Lexmark printers, can also find fault with Panasonic and Sharp printers. For printers from Panasonic, the most common errors are: E10 or abnormal load current crown, crown E11 transfer or abnormal current, LED E12 or downloading open; E13 or failure in obtaining the correct toner density, and E26 or not the fan motor. For the codes Sharp printer error, unable to comply; error of the optical system C1; drive motor defective or C2, defective or C3 polygon motor, heater temperature high or C4, and the lower heater or C5.

There are other error codes for the printer you can find these brands of printer. These errors should not be taken as signals for immediate replacement or refilling of ink cartridges. If you're not sure what you're doing, surfing the Internet for help. Online website has listed more than the printer error codes to help you understand what to do if you receive these messages.

About the Author

This Article is written by John C Arkin from myofficeportal.org the contributor of Office Supplies Information & Resources. More information on the subject is at LED Printer Error Codes: Codes for Different printer brands, and related resources can be found at Toner Cartridge.